Spicer® Drivetrain Components for Mining Trucks

Change Vehicle

dana.menu.logo-01-01

Select your weight class to see a list of available Dana products for your mining truck application.

Spicer® drivetrain products for mining trucks from 15 to 50 tonnes (16 to 55 tons) improve traction, positioning, and braking, and provide maximum productivity at mining sites.

15 - 20 Tonnes

32000 – C8000/9000 TRANSMISSION

Robust and field proven, the Spicer® 32000 Series powershift transmission provides optimal torque for heavy-hauling and mining applications. Numerous configurations, ratios, and options offer highly adaptable solutions to meet almost any vehicle requirement.


32000LDC_Transmission_100x100

114 AXLE

Spicer® Model 114 rigid planetary axles deliver superior tractive force and nimble vehicle steering for front-end loader applications. Inboard wet disc brakes are maintenance-free, eliminating the cost of brake replacement. These axles are available with several differential options to accommodate customer needs.

Specs >


32000LDC_Transmission_100x100

14D AXLE

The Spicer® Model 35R68 (14D) rigid planetary axle increases operator safety in mining load haul dumpers and mining trucks. Robust structural and torsional capacity are field proven through rigorous applications for over 40 years.

Specs>


32000LDC_Transmission_100x100

1550 10 SERIES DRIVESHAFT

Spicer 10 Series driveshafts have been an industry standard for more than 50 years and are ideal for the rigorous demands of most mobile off-highway applications. The Spicer 10 Series offers driveshafts with torque capacities up to 15,700 Nm.


32000LDC_Transmission_100x100

1600 10 SERIES DRIVESHAFT

Spicer 10 Series driveshafts have been an industry standard for more than 50 years and are ideal for the rigorous demands of most mobile off-highway applications. The Spicer 10 Series offers driveshafts with torque capacities up to 15,700 Nm.


32000LDC_Transmission_100x100

6C WING SERIES DRIVESHAFT

Spicer wing-bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating cost. With torque capacities ranging from 1,500 to more than 120,000 Nm and lubrication packages from extended to permanently lubricated.


32000LDC_Transmission_100x100

7C WING SERIES DRIVESHAFT

Spicer wing-bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating cost. With torque capacities ranging from 1,500 to more than 120,000 Nm and lubrication packages from extended to permanently lubricated.

25 - 30 Tonnes

32000LDC_Transmission_100x100

6000 – C8000/9000 TRANSMISSION

The Spicer® 6000 Series powershift transmission features a robust design, tough enough for the most rigorous off-highway applications where productivity and reliability are critical. When used in combination with Dana’s advanced electronic controls, it results in the ultimate vehicle and operator productivity.


32000LDC_Transmission_100x100

16D AXLE

The Spicer® Model 42R112 (16D) axle offers standard, Posi-Torque,™ and no-spin differentials for terrain-specific traction. The modular design is installation-ready and the simplicity increases durability in off-highway work. The double gear reduction design allows for less vehicle wear and better turning capabilities, with a 4.94 wheel-end ratio.

Specs>


32000LDC_Transmission_100x100

19D AXLE

The Spicer® Model 48R150 (19D) rigid planetary axle is designed to handle heavy loads in mining industry applications. Differential options provide necessary torque for a variety of surfaces and vehicle loads, expanding vehicle capabilities and maximizing productivity under rigorous work hours and conditions.

Specs>


32000LDC_Transmission_100x100

37R AXLE

Engineered specifically for front-end loaders and other heavy-duty off-road applications, Spicer® 37R rigid planetary axles feature a rigid three-piece load-supporting design with a differential carrier, housing arm, and planetary wheel-end. Extra-high-capacity wheel-end bearings and heavy section modular structural components allow for a wide range of vehicle weights, tracks, tires, and chain combinations.


32000LDC_Transmission_100x100

1710 10 SERIES DRIVESHAFT

The Spicer 10 Series offers driveshafts with torque capacities up to 15,700 Nm with extended spline life, reduced thrust load under pressure, lower friction under load superior needle bearing retention and easy to service universal joints


32000LDC_Transmission_100x100

6C WING SERIES DRIVESHAFT

Spicer wing-bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating cost. With torque capacities ranging from 1,500 to more than 120,000 Nm and lubrication packages from extended to permanently lubricated.


32000LDC_Transmission_100x100

7C WING SERIES DRIVESHAFT

Spicer wing-bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating cost. With torque capacities ranging from 1,500 to more than 120,000 Nm and lubrication packages from extended to permanently lubricated.


32000LDC_Transmission_100x100

8.5C 10 SERIES DRIVESHAFT

The Spicer 10 Series offers driveshafts with torque capacities up to 15,700 Nm with extended spline life, reduced thrust load under pressure, lower friction under load superior needle bearing retention and easy to service universal joints

35 - 40 Tonnes

32000LDC_Transmission_100x100

8000 – C8000/9000 TRANSMISSION

The Spicer® 8000 Series powershift transmission is built for the heavy-labor industry, designed to work under extreme conditions. The transmission features a robust design, tough enough for the most rigorous off-highway applications where productivity and reliability are critical. When used in combination with Dana’s advanced electronic controls, it results in the ultimate vehicle and operator productivity.


32000LDC_Transmission_100x100

19D AXLE

The Spicer®Model 48R150 (19D) rigid planetary axle is designed to handle heavy loads in mining industry applications. Differential options provide necessary torque for a variety of surfaces and vehicle loads, expanding vehicle capabilities and maximizing productivity under rigorous work hours and conditions.

Specs>


32000LDC_Transmission_100x100

21D AXLE



32000LDC_Transmission_100x100

43R AXLE

The robust, maintenance-free design of Spicer® 43R rigid planetary axles offers infinite structural life and increased durability. A wide wheel bearing spread accommodates high side loads, and service-free wet disc brakes eliminate the cost of brake replacement. With more capacity and higher output torque, these axles offer superior performance in front-end loaders and other heavy-duty off-road applications

Specs>


32000LDC_Transmission_100x100

1710 10 SERIES DRIVESHAFT

The Spicer 10 Series offers driveshafts with torque capacities up to 15,700 Nm with extended spline life, reduced thrust load under pressure, lower friction under load superior needle bearing retention and easy to service universal joints


32000LDC_Transmission_100x100

7C WING SERIES DRIVESHAFT

Spicer wing-bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating cost. With torque capacities ranging from 1,500 to more than 120,000 Nm and lubrication packages from extended to permanently lubricated.


32000LDC_Transmission_100x100

8.5C 10 SERIES DRIVESHAFT

The Spicer 10 Series offers driveshafts with torque capacities up to 15,700 Nm with extended spline life, reduced thrust load under pressure, lower friction under load superior needle bearing retention and easy to service universal joints

45 - 50 Tonnes

32000LDC_Transmission_100x100

8000 – C8000/9000 TRANSMISSION

The Spicer® 8000 Series powershift transmission is built for the heavy-labor industry, designed to work under extreme conditions. The transmission features a robust design, tough enough for the most rigorous off-highway applications where productivity and reliability are critical. When used in combination with Dana’s advanced electronic controls, it results in the ultimate vehicle and operator productivity.


32000LDC_Transmission_100x100

53R300 AXLE

Engineered specifically for mining load haul dump (LHD) loaders, underground machines, large loaders, trucks, and specialty vehicles, the Spicer® Model 53R rigid planetary axle offers a wider ratio and lower R&P ratio, which reduces stress and increases torque for greater power. A wider track design provides maximum stability on rugged terrain.


32000LDC_Transmission_100x100

1880 10 SERIES DRIVESHAFT

The Spicer 10 Series offers driveshafts with torque capacities up to 15,700 Nm with extended spline life, reduced thrust load under pressure, lower friction under load superior needle bearing retention and easy to service universal joints


32000LDC_Transmission_100x100

8C WING SERIES DRIVESHAFT

Spicer wing-bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating cost. With torque capacities ranging from 1,500 to more than 120,000 Nm and lubrication packages from extended to permanently lubricated.


32000LDC_Transmission_100x100 9C WING SERIES DRIVESHAFT Spicer wing-bearing style driveshafts are designed for longer life, minimal maintenance, and lower operating cost. With torque capacities ranging from 1,500 to more than 120,000 Nm and lubrication packages from extended to permanently lubricated.

This is a unique website which will require a more modern browser to work! Please upgrade today!